Paper Towel Dispenser and Waste Receptacle - 0469

0469_ASI-PaperTowelDispenserAndWasteReceptacle@2x.png
0469_ASI-PaperTowelDispenserAndWasteReceptacle@2x.png

Paper Towel Dispenser and Waste Receptacle - 0469

201.61

Recessed Unit. Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly. Waste container is emptied manually on cycle determined by maintenance needs. Locking compartment and receptacle retainer prevents unauthorized access or removal. Dispenses 600 C-fold or 800 multi-fold paper towels. 12 gal. (46 L) stainless steel waste receptacle.

Quantity:
Add To Cart

DIMENSIONS

Overall Dimensions:

  • 17-1/4" x 56" x 4-1/4"
  • 438 x 1422 x 108 mm

Wall Opening:

  • 15-3/4" x 54-1/2" x 4"
  • 400 x 1384 x 102 mm

ADDITIONAL INFORMATION

Recessed Paper Towel Dispenser and Waste Receptacle shall hold and dispense 800 standard multi-fold or 600 standard Cfold paper towels and shall have a waste capacity of 12 gal (46 L). Towel dispenser, door, frame, waste container and cabinet shall be fabricated of 22 gauge type 304 stainless steel alloy 18-8. All exposed surfaces shall be satin finish and be protected during shipment with PVC film easily removable after installation. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety. Door shall be fabricated in double-pan construction with fiberboard filler and shall be attached to cabinet at side with a full-length 3/16" diameter [Ø4.8] stainless steel multi-staked piano hinge and be held closed with a tumbler lock keyed alike to other ASI washroom equipment. Waste container shall have hemmed edges for safety and shall be retained by a tumbler lock keyed alike to other ASI washroom equipment. Face trim shall be 1" [25] wide formed from one piece with no miters, welding or open seams and have 1/4" [6] square return to wall. Structural assembly of all components shall be of welded construction. Cabinet shall have no exposed fastening devices or spot-welded seams.