Roll Paper Towel Dispenser - 04523

04523_large.png
04523_large.png

Roll Paper Towel Dispenser - 04523

350.71

Unit holds and dispenses one 8′′or 9′′ (203 mm or 229 mm) wide standard towel roll up to 800 ft. (244m) long and one stub roll up to 4′′ (102 mm) diameter.

Unit allows settings for towel dispense length of 2-1/2′′, 4′′ or 5′′ (64 mm, 102 mm, or 127 mm) with no adapter plates. Locking door prevents unauthorized access or removal.

Quantity:
Add To Cart

DIMENSIONS

Overall Dimensions:

  • 17-1/4" x 20" x 9-3/4"
  • 438 x 508 x 248 mm

Wall Opening:

  • 15-3/4" x 18-1/2" x 9-5/8"
  • 400 x 470 x 245 mm

ADDITIONAL INFORMATION

Recessed Roll Paper Towel Dispenser shall hold and dispense one 8′′or 9′′ (203mm or 229mm) wide standard towel roll up to 800 ft. (244m) long and one stub roll up to 4′′ (102mm) diameter. Unit shall be fabricated of alloy 18-8 stainless steel type 304, 22 gauge; door and rear panel of unit shall be 18 gauge. A dispensing mechanism shall be supplied. Door shall be attached to cabinet at side with a full length 3/16′′ (5mm) multi staked piano hinge and shall be held closed with tumbler lock keyed alike to other ASI washroom equipment. Face trim shall be 1′′ (25mm) wide formed from one piece with no miters, welding or open seams and shall have a 1/4′′ (6mm) square return to wall. Structural assembly of all components shall be of welded construction. All exposed surfaces shall have a No 4 satin finish and shall be protected with a PVC film easily removable after installation. Unit shall allow settings for towel dispense length of 2-1/2′′, 4′′ or 5′′ (64mm, 102mm, or 127mm) with no adapter plates.

Towels are fed by lever action until supply is depleted. Unit may be reloaded with a full roll to automatically start when finished with an existing partial (stub) roll. Preset length of towel dispensed may be adjusted for 2-1/2′′, 4′′, or 5′′ (64mm, 102mm , or 127mm) long increments. Locking door prevents unauthorized access or removal.